TRANSPARENT WATER PROOF BANDAGES 10S

Transparent waterproof island wound dressing, which utilizes a thin polyurethane film combined with a central absorbent pad to provide a sterile, water-resistant barrier for cuts, scrapes, or post-surgical wounds. Step-by-step application guide Transparent film dressings use a multi-layer design ("picture-frame" or numbered tab system) to prevent the thin film from wrinkling or sticking to itself during application. Prep the skin: clean the wound and surrounding area thoroughly. Dry the skin completely. The waterproof adhesive will not stick properly to damp, greasy, or oily skin. Remove the bottom liner (layer 1): peel off the primary paper backing sheets (often marked as step 1) to expose the sticky adhesive surface and the absorbent pad. Position and place: hold the dressing by its edges or structural tabs. Center the white absorbent pad directly over the wound. Press down firmly from the center outward to smooth the dressing onto the healthy skin. Do not stretch the film during application, as stretching causes the edges to pull back and lift later. peel the top carrier layer (layer 2): once the bandage is securely on the skin, locate the top protective film layers (often marked with green grid lines, numbers, or wavy edge tabs). Carefully peel these supporting pieces away from the top